Product Details
Description
Made of PC material, our Automobile Decoration PC Films are completely transparent and can be invisible immediately after installation, making your car look brand new. And they protect your car's surfaces from gravel, sewage, and bird droppings, making them easy to wipe and clean even if they're dusty. In addition, they have excellent performance, and the material is very tough, which is not easy to peel, crack or break during use, which can avoid the aging problem of your car paint. Due to these many advantages, they are widely used in the protection of hoods, front bumpers, headlights, taillights, window frames.
Features
Our Automobile Decoration PC Films are synthetic films with a stable molecular structure and are not easily discoloured. They have a high-density air-guiding system that prevents air bubbles from forming during the sticker process and allows for a true fit to all corners of the bodywork. Thanks to their tough PC material, they are highly tensile and flexible and can withstand greater stretching. They are also made of removable adhesive, so you can apply them dry, without spraying water, and tear them off and reuse them if they are crooked, which not only makes it easier to adjust the bits, but also effectively reduces the cost of wear and tear.
Details
Type |
IMD21 |
IMD11 |
Filter By Gauge (mm) |
0.125~0.6 |
0.125~4.0 |
Filter By Finish: |
polished,Matte |
Polished |
Filter By Color: |
semi-transparent |
clear |
Picture |
|
|
Physical Parameters:
Product Datasheet
Item |
Property |
IMD21 |
IMD11 |
Unit |
Test Method |
Physical |
Density |
1.2 |
1.2 |
g/cm3 |
ISO 1183 |
Haze |
>70 |
<0.5 |
% |
ASTM D1003 |
Light Transmission |
>85 |
89 |
% |
ASTM D1003 |
Mechanical |
Tensile Strength |
60 |
60 |
MPa |
ISO 527 |
Elongation |
>100 |
>100 |
% |
ISO 527 |
Bend Strength |
91 |
91 |
MPa |
ISO 178 |
Tensile Modulus |
2300 |
2300 |
MPa |
ISO 178 |
Surface tension |
≥34 |
≥34 |
dyn/cm |
Test fluid |
Electrical |
Dielectric Constant |
3 |
3 |
- |
IEC60250 |
Resistant Puncture Voltage |
30 |
30 |
MV/mm |
IEC 60243 |
Surface resistivity |
1.00E+16 |
1.00E+16 |
Ω/square |
IEC 60093 |
Volume resistivity |
1.00E+17 |
1.00E+17 |
Ω-cm |
IEC 60093 |
Thermal |
Coefficient of Thermal Expansion |
5.8 |
5.8 |
×10-5/℃ |
ISO 11359 |
Thermal Conductivity Rate |
0.2 |
0.2 |
W/(m*K) |
ASTM D5470 |
Thermal Shrinkage |
0.5~0.7 |
0.5~0.7 |
% |
ASTM D1204 |
Tg |
152 |
152 |
℃ |
ISO306 |
Flammability |
Grade of resistant flame |
V-2/VTM-2 |
V-2/VTM-2 |
E249605 |
Tip: This test data is for reference only, not as an absolute application index
Certification:
Product Application:
http://www.teseidg.com/